Elegant design
With its slim design with a depth of only 20 mm, you can store the X1e unnoticed in inside pockets of a jacket. With its 240 g, it is barely heavier than common smartphones.
The X1e handheld radio for covert and inconspicuous uses. It is only 20 mm thick.
The X1e handheld radio from Hytera for covert and inconspicuous uses satisfies the open ETSI standard DMR and enters the market as the smallest DMR radio in the world. It represents a perfect combination of robust construction, versatile functions and clever design. The most surprising aspect about this device is its small size. It is only 20 mm thick!
With its slim design with a depth of only 20 mm, you can store the X1e unnoticed in inside pockets of a jacket. With its 240 g, it is barely heavier than common smartphones.
The X1e meets all the requirements of the open ETSI standard DMR as well as MIL810-C/D/E/F/G and degree of protection IP67. The device series thus offers you excellent features even under rough operating conditions.
With the combined application of the narrow band codex and digital technologies for debugging, the X1e ensures an excellent voice quality even in loud environment and in peripheral areas of radio coverage.
Wireless audio accessories from Hytera can be connected directly to the X1e. As such the radio can be carried conveniently without having to route cables through the clothing.
With the X1e you communicate securely thanks to digital encryption for voice and data using the encryption algorithm ARC4 (40 bit) in accordance with DMRA or with the optional algorithms AES128 and AES256 (128 and 256 bit).
Thanks to the TDMA process, the X1e allows an assignment of the available band-width with double channel capacity. This has a clear mitigating effect on increasing spectrum scarcity.
Upgradeable software makes the use of new features possible. By altering the firm-ware-software, other digital and analog operating modes can be enabled, without the need for purchasing a new radio device.
General data
Frequency range |
VHF: 136 - 174 MHz |
Supported operating modes |
DMR Tier II in accordance with ETSI TS 102 361-1/2/3 |
Number of channels |
1024 |
Number of zones |
3 |
Channel spacing |
12.5 / 20 / 25 kHz (analog) |
Operating voltage |
7.4 V (nominal) |
Standard battery |
1400 mAh (lithium-ion battery) |
Battery service life (5-5-90 duty cycle, high transmitting power, standard battery) |
approx. 10 h (with 1100-mAh-Akku) |
Frequency stability |
±1.5 ppm |
Antenna impedance |
50 Ω |
Dimensions (H × B × T, with battery, without antenna) |
119,5 × 57 × 18 mm (1100-mAh-Akku) |
Weight (with antenna and battery) |
approx. 220 g (with 1100 mAh-battery) |
Transmitter
Transmitting power |
VHF: 1 / 5 W |
Modulation |
11K0F3E at 12.5 kHz |
4FSK digital modulation |
12.5 kHz (data only): 7K60FXD |
Interfering signals and harmonics |
- 36 dBm (< 1 GHz) |
Modulation limiting |
± 2.5 kHz at 12.5 kHz |
Noise cancellation |
40 dB at 12.5 kHz |
Adjacent channel selectivity |
60 dB at 12.5 kHz |
Audio response |
+1 dB to -3 dB |
Nominal audio distortion |
≤ 3 % |
Digital vocoder type |
AMBE+2™ |
Receiver
Sensitivity (analog) |
0.3 μV (12 dB SINAD) |
Sensitivity (digital) |
0.3 μV / BER 5 % |
Adjacent channel selectivity |
TIA-603: 60 dB at 12.5 kHz / 70 dB at 20 and 25 kHz |
Intermodulation |
TIA-603: 70 dB at 12.5/20/25 kHz |
Spurious response rejection |
TIA-603: 70 dB at 12.5/20/25 kHz |
Signal-noise ratio (S/N) |
40 dB at 12.5 kHz |
Nominal audio power output |
0,5 W |
Nominal audio distortion |
≤ 3 % (500 mW) |
Nominal audio power output |
+ 1 dB to - 3 dB |
Conducted spurious emission |
< -57 dBm |
Environmental conditions
Operating temperature range |
-30 °C to +60 °C |
Storage temperature range |
-40 °C to +85 °C |
ESD |
IEC 61000-4-2 (level 4) |
Protection against dust and moisture |
IP67 |
Shock and vibration resistance |
MIL-STD-810 C/D/E/F/G |
Relative humidity |
MIL-STD-810 C/D/E/F/G |
GPS
Time to first fix (TTFF) |
< 1 minute (cold start) |
Horizontal accuracy |
< 10 meter |
Features marked with * are available in future versions of the product.
All technical data were tested according to the respective standards. Due to continuing development, technical changes are reserved.