Light and easy to operate
The radios of the PD5 series are particularly ergonomic and easy to operate. With a weight of only 280 g, the PD565 offers you a high level of mobility comfort.
Compact design and outstanding value for the money.
With new software (R9.0): As a result of legal patent litigations, the TDMA direct mode was removed for digital operation. With the Hytera patented Pseudo Trunking two parallel calls in direct mode are still possible.
The PD565 from Hytera impresses with its compact design, its range of functions and its excellent value for the money. With the support of digital and analog mobile radio, the PD565 is your perfect companion for entering the world of professional digital mobile radio.
The radios of the PD5 series are particularly ergonomic and easy to operate. With a weight of only 280 g, the PD565 offers you a high level of mobility comfort.
With the combined application of the narrow band codec and digital technologies for error correction, the PD565 ensures excellent voice quality even in loud environments and in peripheral areas of radio coverage.
The PD565 was developed in compliance withthe ETSI Digital Mobile Radio (DMR) standard.With the optionally available 2000-mAh battery,it will even be 20 hours.
The PD565 was developed in conformity with the ETSI radio standard Digital Mobile Radio (DMR). The handheld radio supports the conventional DMR mode and can also be operated in manual mode. On top of that, the radios support Hytera XPT radio systems. That makes the terminals of the PD5 series the ideal companion for the move to digital mobile radio.
General data
| Frequency range |
VHF: 136 - 174 MHz |
| Supported operating modes |
DMR Tier II in accordance with ETSI TS 102 361-1/2/3 |
| Number of channels |
512 |
| Number of zones |
32 |
| Channel spacing |
12.5/20/25 kHz (analog) |
| Operating voltage |
7.4 V (nominal) |
| Standard battery |
1500 mAh (lithium-ion battery) |
| Battery service life (5-5-90 duty cycle, high transmitting power, standard battery) |
approx. 11 hours (analog) |
| Frequency stability |
±0.5 ppm |
| Antenna impedance |
50 Ω |
| Dimensions (H×W×D, without antenna) |
115 x 54 x 27 mm |
| Weight (with antenna and standard battery) |
approx. 280 g |
| Programmable keys |
6 |
| LCD display |
monochrome LCD display, 3 lines |
Transmitter
| Transmitting power |
VHF: 1 / 5 W |
| Modulation |
11 K0F3E at 12.5 kHz |
| 4FSK digital modulation |
12.5 kHz (data only): 7K60FXD |
| Interfering signals and harmonics |
-36 dBm (< 1 GHz) |
| Modulation limiting |
±2.5 kHz at 12.5 kHz |
| Noise cancellation |
40 dB at 12.5 kHz |
| Adjacent channel selectivity |
60 dB at 12.5 kHz |
| Audio response |
+1 dB to -3 dB |
| Nominal audio distortion |
≤ 3 % |
| Digital vocoder type |
AMBE+2TM |
Receiver
| Sensitivity (analog) |
0.22 μV (12 dB SINAD) |
| Sensitivity (digital) |
0.22 μV / BER 5% |
| Adjacent channel selectivity |
TIA-603: 60 dB at 12.5 kHz / 70 dB at 20 and 25 kHz |
| Intermodulation |
TIA-603: 70 dB at 12.5/20/25 kHz |
| Spurious response rejection |
TIA-603: 70 dB at 12.5/20/25 kHz |
| Signal-noise ratio (S/N) |
40 dB at 12.5 kHz |
| Nominal audio power output |
0.5 W |
| Nominaludio distortion |
≤ 3 % |
| Audio response |
+1 dB to -3 dB |
| Conducted spurious emission |
< -57 dBm |
Environmental conditions
| Operating temperature range |
-30 °C to +60 °C |
| Storage temperature range |
-40 °C to +85 °C |
| ESD |
IEC 61000-4-2 (level 4) |
| Protection against dust and moisture |
IP54 |
| Shock and vibration resistance |
MIL-STD-810 C/D/E/F/G |
| Relative humidity |
MIL-STD-810 C/D/E/F/G |
Features marked with * are available in future versions of the product.
All technical data were tested according to the respective standards. Due to continuing development, technical changes are reserved.