Flexible deployment
Different options will match any communication scenario: wall-mounted for indoor coverage, pole-mounted for outdoor coverage, vehicle-mounted for emergency situations, and box-mounted for temporary operation.
Hytera DMR Trunking Cube
Most flexible DMR base station
Product description
The DMR Trunking Cube is designed with fast deployment and operation simplicity in mind. Save time and cost in installation and associated space required.
All in one
The Hytera Trunking Cube base station is highly integrated: Only provide power to the base station and start your communication. Additional, the base station supports diversity receiving and can provide excellent coverage.
Software-defined radio (SDR)
Within the same hardware platform you can control carrier capacity (1 to 8), manage frequencies via the software controller in order to deliver a flexible user-friendly system. SDR ensures the base station is easy to control and offers smooth expansion options.
High spectrum efficiency
Based on multicarrier technology, channel spacing is more than 50 KHz instead of the traditional 250 KHz plus. What's more, it can work in DMR trunking simulcast mode, which means all base stations implemented in a single network can adopt the same frequencies.
Features
Technical data
General data
| Protocol |
DMR Tier III |
| Frequency |
UHF: 350 – 370 MHz |
| Carrier capacity |
1 - 8 |
| Transmission |
Dual optical fiber port |
| Time synchronization |
GPS / Beidou / IEEE 1588 V2 |
| Channel spacing |
≥ 50 kHz |
| Duplex spacing |
10 MHz |
| Power supply |
DC 48 V |
| Power consumption |
≤ 550 W |
| Operating temperature |
-40 °C to +55 °C |
| Storage temperature |
-40 °C to +85 °C |
| Operating humidity |
5% to 95% |
| Atmospheric pressure |
70 kPa to 106 kPa |
| Protection class |
IP65 |
| Wind resistant |
200 km/h |
| Lightning protection |
Power supply port: 20 KA |
| Weight |
< 23 kg |
| Dimensions (H × B × T) |
435 × 340 × 157.5 mm |
| MTBF |
≥ 100,000 h |
Receiver
| Static sensitivity |
-122 dBm at BFR ≤5% |
| Co-channel rejection |
≥ -12 dB |
| Adjacent channel rejection |
≥ 60 dB |
| Intermodulation response rejection |
≥ 70 dB |
| Blocking |
≥ 84 dB |
| Spurious response rejection |
≥ 70 dB |
| Spurious emission |
9.000 KHz to 1.00 GHz: ≤-57 dBm at 100 kHz |
Transmitter
| Output power per carrier (Antenna port) |
2 CH ≤ 50 W |
| Frequency deviation |
≤ 3 % |
| Occupied bandwidth |
≤ 8.5 kHz |
| Frequency stability |
±0,5 × 10-6 |
| Intermodulation attenuation |
≤ -70 dB |
| Spurious emission |
9.000 KHz to 1.00 GHz: ≤ -36 dBm at 100 kHz |
Features marked with * are available in future versions of the product.
All technical data were tested according to the respective standards. Due to continuing development, technical changes are reserved.
