WARNING: Your current browser is outdated! Please use for proper usage and applicationan an alternative browser to open this website. Instead of using another browser you can try to update the used one.

Hytera RD985 - DMR repeater

The digital repeater RD985 was designed according to the DMR radio standard and in consideration of the actual requirements of its users.

    Product description

    The digital repeater RD985 is the heart for multi-cell conventional DMR radio networks and was developed according to the ETSI standard for DMR. It offers an ergonomic design, reliability and outstanding digital functions for sophisticated communication. RD985 – Your digital advantage over your competitors!

    DMR-Repeater RD985 - Produktfoto

    Dual mode and automatic change

    The RD985 can automatically change between digital and analog mode depending on the type of receiver signal.

    Heart of professional radio systems

    All the repeaters from Hytera can be connected in digital mode via IP connection to a comprehensive radio network. In analog mode, the repeaters can be connected together back-to-back. Both in conventional analog and DMR modes (DMR Tier II), the RD985 repeater can be used together with the RD985S, RD625 and RD965 repeaters in a radio system.

    Improved utilization of the frequency spectrum

    Thanks to the TDMA technology, twice as many users can use the same channel, such as is the case with analog or digital FDMA systems. Due to the restricted frequency resources, this represents an important relief and reduces the expenses for system terminals and licenses.

    Secure communication

    To protect your radio communications against eavesdropping, the RD985 repeater possesses advanced digital encryption functions, according to the DMRA specification. Depending on the variant, the RD985 supports 40-, 128- or 256-bit encryption. With air interface encryption signaling and communications data between radio and repeaters are transmitted with reliable protection.

    High transmitting power

    The repeater offers an adjustable transmitting power of up to 50?Watt and thereby satisfies the high requirements for modern PMR radio systems.

    Extremely reliable

    Since the repeater was designed according to military standards, it offers high reliability and excellent performance. Test results from independent laboratories have shown that the repeater can be operated for up to 100,000 hours without interference (MTBF) and it therefore meets the requirements for use in extreme situations.

    Flexible installation options

    The RD985 repeater can be installed in a 19-inch equipment rack with an optional installation kit. Alternatively, it can easily be operated on a rack, a bracket or a table. With the additionally available installation kit, an optional duplexer can be housed in the chassis.

    High cooling capacity

    The booster can dissipate any generated heat with extraordinary efficiency. In addition, the integrated fan system ensures stable and powerful operation. 

    High-resolution 2-inch LCD color display

    Whether during ongoing operation or during a maintenance task: You can easily access all the desired information via the large LCD color display.

    Professional design

    Integrated LEDs on the volume controller complement the innovative repeater design and simultaneously optimize its use. The repeaters are easy to use thanks to their clear menus and the large navigation controller.


    Technical data

    General data

    Frequency ranges

    VHF: 136 – 174 MHz
    UHF: 400 – 470 MHz / 450 – 520 MHz

    Number of channels


    Number of zones


    Channel spacing

    12.5 / 20 / 25 kHz (analog)

    12.5 kHz (digital)

    Operating voltage

    13.6 ± 15% VDC

    max. power consumption

    ≤ 0.8 A (at operational readiness)
    ≤11A (at transfer)

    Frequency stability

    ±0.5 ppm

    Antenna impedance

    50 Ω

    Dimensions (L x W x H)

    88 x 483 x 366 mm


    8.5 kg

    LCD display

    220 x 176 pixels, 262,000 colours, 2.0 inches, 4 lines


    Transmitting power

    VHF: 1 – 50 W, 5 – 50 W
    UHF: 5 – 50 W


    11K0F3E at 12.5 kHz
    14K0F3E at 20 kHz
    16K0F3E at 25 kHz

    4FSK digital modulation

    12.5 kHz (data only): 7K60FXD
    12.5 kHz (data and voice): 7K60FXW

    Interfering signals and harmonics

    -36 dBm < 1 GHz
    -30 dBm > 1 GHz

    Modulation limiting

    ± 2.5 kHz at 12.5 kHz
    ± 4.0 kHz at 20 kHz
    ± 5.0 kHz at 25 kHz

    Hum and noise

    40 dB at 12.5 kHz
    43 dB at 20 kHz
    45 dB at 25 kHz

    Adjacent channel selectivity/

    60 dB at 12.5 kHz
    70 dB at 20/25 kHz

    Audio response

    + 1 dB to - 3 dB

    Audio distortion

    ≤ 3 %

    Digital vocoder type

    AMBE +2™


    Sensitivity (analog)

    0.3 μV (12 dB SINAD)
    0.22 μV (typical) (12 dB SINAD)
    0.4 μV (20 dB SINAD)

    Sensitivity (digital)

    0.3 μV / BER 5%

    Adjacent channel selectivity

    TIA-603: 65 dB at 12.5 kHz / 75 dB at 20 and 25 kHz
    ETSI: 60 dB at 12.5 kHz / 70 dB at 20 and 25 kHz


    TIA-603: 75 dB at 12.5/20/25 kHz
    ETSI: 70 dB at 12.5/20/25 kHz

    Spurious response rejection

    TIA-603: 80 dB at 12.5 / 20 / 25 kHz
    ETSI: 80 dB at 12.5 / 20 / 25 kHz

    Signal-noise ratio (S/N)

    40 dB at 12.5 kHz
    43 dB at 20 kHz
    45 dB at 25 kHz

    Nominal audio power output

    0.5 W

    Audio distortion

    ≤ 3 %

    Audio sensitivity

    +1 dB to -3 dB

    Conducted spurious emission

    < 57 dBm

    Environmental conditions

    Operating temperature range

    -30 °C to +60 °C

    Storage temperature range

    -40 °C to +85 °C

    Relative humidity

    < 95 %

    Features marked with * are available in future versions of the product.

    All technical data were tested according to the respective standards. Due to continuing development, technical changes are reserved.

    Scope of delivery

    • RD985 repeater
    • Power cord
    • Fuse
    • Manual
    Find a Dealer
    Search for location:
    Search for radius:
    Close search