WARNING: Your current browser is outdated! Please use for proper usage and applicationan an alternative browser to open this website. Instead of using another browser you can try to update the used one.

EHN16 headset with PTT button and C-clip

Audio accessories for digital handheld radios.

    Product description

    The earpiece set EHN16 consists of a PTT button and a microphone as well as an earbud with C-clip. Thanks to the 3.5 mm port, the earbuds can easily be replaced.

    VOX function

    The earpiece supports the VOX function if it is programmed into the radio. It enables the radio to automatically activate voice transmission, so that it is possible to communicate almost completely hands free.

    Earpiece set

    This set consists of the base set with PTT button and microphone ACN-01 and the earbud with C-clip EH-01.

    Supported radios

    This earpiece is designed for operation with the DMR handheld radios of the PD7 series and the PT580H TETRA radios.

    Features

    Technical data

    General Properties

    Protection against dust and moisture

    IP54

    Operating temperature range

    -20 to 60 °C

    Microphone properties

    Sensitivity

    -45 ± 3 dB at 1 kHz, 0 dB = 1 V/0.316G

    Impedance

    ≤ 2.2 kΩ at 1 kHz

    Speaker properties

    Sensitivity

    115 ± 3 dB 1 kHz

    Nominal power

    10 mW

    Maximum power

    20 mW

    Speaker impedance

    32 Ω ± 5% at 1 kHz

    Features marked with * are available in future versions of the product.

    All technical data were tested according to the respective standards. Due to continuing development, technical changes are reserved.

    Scope of delivery

    Find a Dealer
    Search for location:
    Search for radius:
    km
    Close search